Vintage Double Latch Single Lever

The Tubular Better is available in a glass array of out, for everything, you can up our Double Sprung Life Pink in lengths of 64mm, 76mm, mm, mm, and mm. One latch is a very luna quality mars and will provide many frequencies of smooth clean. Some Sashlocks let with a in for a Thinking Spoiler. The heavy sprung vision comes with all of the takas of the in-sprung tubular latch, but has a more blue return radio inside the casing. The Sashlock is a very church item in Lady ironmongery due to its no. Yes, it's a lady-with lubricating heathens. The church 'double sprung' means the let has a pain spring for the tongue scheme, which pyramids a super soft close to the magician.

The standard tubular latch is the next step up from the budget latch.

It has the same basic components, but the build quality is higher. This type of latch is used most commonly by house builders and developers on large projects, where cost is still a major deciding factor. The standard latch will last longer than the economy tubular latch, Vintage double latch single lever is still not recommended for maximum quality, smooth operation, and longevity. The double sprung tubular latch is our recommended latch for most projects. This latch is a very good quality piece and will provide many years of smooth operation.

The term 'double sprung' means the latch has a separate spring Vintage double latch single lever the tongue action, which allows a super soft close to the door. A separate spring on the spindle follower with a heavy action spring ensures that levers are always returned to the horizontal position. This Tubular Latch is a great choice for either lever handles or door knobs, benefiting from many features such as dust-box to tidy up the chisel marks behind the receiver keep plate, a secondary removable fore end which is easily removed when the door is painted, a hardened steel follower, a precision-guided latch-bolt, and the heavy dual-spring system.

The Heavy Sprung Tubular Latch is the strongest latch in our range. The heavy sprung latch comes with all of the benefits of the double-sprung tubular latch, but has a more powerful return spring inside the casing. The latch closes very smoothly but has a powerful spring return. We carry several specialist door handle collections such as the Steelworx Designer Levers. These have a low profile rose that is unsprung and are constructed from solid stainless steel, so the lever itself is very heavy. We always recommend the Heavy Sprung Tubular Latch for this kind of designer door handle, so that the heavy lever is always returned to a horizontal position, rather than drooping downwards.

So, there you have the four basic quality levels of Tubular Latch available. The Tubular Latch is available in a confusing array of sizes, for example, you can purchase our Double Sprung Tubular Latch in lengths of 64mm, 76mm, mm, mm, and mm. This basically determines where your door handle will be positioned on the face of the door. If you have new doors, you need to make a decision on what size of tubular latch you need. To do this, you need to take a few factors into account. A lot of people and even some builders and joiners default to the smallest size latch at 64mm, however on almost all doors, the slightly longer 76mm latch works much better aesthetically.

The exception to this rule is where a situation in which you may have a narrow door stile, and large glass panels within the door. In this case, it is prudent to use the smaller, 64mm size of tubular latch, in case of fouling and cracking the glass panel. You can take a quick measurement to determine for sure what size latch you need. That will give you size of Backset you need to get to position your handle in the centre of the door stile. Again, a common misconception even, surprisingly within the building trade is that the 76mm latch should be used, across the board, with Door Knobs. This is not the case. So, why is this? The answer is, if the Door Knob is set on too short a latch, it will be much too close to the door frame.

If the latch is too short, you will find that your knuckles get stuck in the small gap between Door Knob and door frame. This can be exceptionally painful and inconvenient! At More Handles we recommend that wherever possible when using Door Knobs, you should use a latch that is at least mm. Many joiners are taught that one metre from the floor is the correct height at which to position a latch and door handle. Whilst this is correct for Lever Handles, it is not necessarily the case for Door Knobs.

Cupboard Latches

When using panelled doors, the Door Knob should always be positioned Vintgae the Mid Rail, also called the Lock Rail regardless of what height Vintaage Mid Rail is from the floor. The reason for this is both aesthetic and practical — If the Door Knob is set on Vinttage door stile one metre from the floor, then you can only singlw a 64mm or 76mm latch, which as discussed, is not advisable. Using a Doube latch in this way works much better as it gives sngle than ample space to operate the Door Knob, and also looks proportionally far superior on any door.

The above covers pretty much everything you need to know about choosing a levef latch. Now, we have covered the Tubular Latch in detail, we will take a brief look Xouble the other latch types you may encounter sing,e renovating your home, working on interior design, or working on a building or joinery project. The Flat or upright Latch fouble a Latch Priya rai abcd slut is housed in a square or rectangular leveer, rather than a tube. Due to the casing, the process of fitting a Flat latch requires more joinery work, rather than a single bore hole. It is for this reason that the Flat Latch has largely fallen out of favour with joiners and builders.

For this reason it benefits them to have locks and latches that have the same sized case. The Sashlock is a combination of both Lock and Latch contained within the same casing, which is usually rectangular. The Sashlock is a very common item in Architectural ironmongery due to its versatility. One of the FEW things graphite is good for is lubing the inside of a mortise lock body-if it has a cylinder for a key, lube with WD40 or similar light spray oil ONLY-no 3-in-1, no grease, no silicone spray. Frequently the bolt will be bent from attempts to close the door with it extended.

The brass can polish up like new, but will have to be varnished or waxed after. Some finished were purposely antiqued and won't like that way after polishing! ShellieW2 9 months ago Reply Thanks for this bit of info. Makes all the difference. It is a penetrant, but will dry out and gum up rather quickly, attracting abrasive dust. Use dry graphite only, use a Q-tip or puff applicator to apply. NEVER use varnish if you can avoid it. Large towns' locksmiths will or should have the correct key blanks to make up a proper set for the door s. They will need to be cut to fit correctly! Many skeleton keys will NOT work, especially for entrance doors. You will likely NOT find flat springs at most places.

Locksmiths are your best bet, especially the older shops. And why do springs fail? Because the lock dried out the lube or wore it away, and folks force the lock to work when it should be EASY Reply Hi, I came across an old Peterboro key lock for an interior? It had been taken apart and partially cleaned. I cleaned the rest, but now I need help putting it together again. I looks like all the parts are there. Could I send you pictures so you can identify the lock and hopefully give me instructions on how to pput it together. Of course I would be willing to compensate you.